How to Repair Broken Glasses Frame


Glasses are not just a functional accessory but also an essential part of many people’s lives. Unfortunately, accidents happen, and glasses frames can sometimes break. In this article, we will guide you through the process of repairing broken glasses frames, helping you save money and extend the lifespan of your eyewear.

Understanding Broken Glasses Frames

Before diving into the repair process, it’s crucial to understand the different types of breaks and assess the damage. By doing so, you can determine the appropriate repair method and ensure the best possible outcome for your glasses.

Common Types of Breaks

There are several common types of breaks that can occur in glasses frames. These include:

  1. Fractured or cracked frames
  2. Broken hinges
  3. Snapped or bent temples/arms
  4. Damaged nose pads

Assessing the Damage

Take a close look at the broken frame to evaluate the severity of the damage. Identify the specific areas that need repair, such as cracks, hinges, or temples. Understanding the extent of the damage will help you choose the right tools and materials for the repair.

Tools and Materials Needed

Before you start the repair process, gather the necessary tools and materials. Here are some commonly used items:

  1. Superglue or epoxy resin
  2. Small clamps or clothespins
  3. Fine-grit sandpaper
  4. Heat source (e.g., hairdryer)
  5. Soldering iron or welding equipment (for metal frames)
  6. Replacement hinges, temples, or nose pads (if needed)

Repairing Plastic Frames

Using Superglue

Superglue is a quick and easy way to repair minor cracks and breaks in plastic frames. Follow these steps:

  1. Clean the broken area and remove any dirt or debris.
  2. Apply a small amount of superglue to both sides of the break.
  3. Press the broken pieces together and hold them in place for a few minutes.
  4. Use small clamps or clothespins to secure the repair while the glue dries.
  5. Once the glue has dried, remove any excess with fine-grit sandpaper.

Employing Epoxy Resin

Epoxy resin provides a stronger bond than superglue and is ideal for more significant breaks. Here’s how to use epoxy resin for repairing plastic frames:

  1. Prepare the broken area by cleaning it thoroughly.
  2. Mix the epoxy resin according to the manufacturer’s instructions.
  3. Apply the epoxy to both sides of the break and press them together firmly.
  4. Use small clamps or clothespins to hold the pieces in place until the epoxy sets.
  5. After the epoxy has fully cured, remove any excess and sand the area for a smooth finish.

Utilizing Heat

In some

cases, heat can be used to repair plastic frames. This method is suitable for frames with slight bends or deformations. Follow these steps:

  1. Heat the damaged area using a hairdryer or heat gun.
  2. Gently reshape the plastic while it is still warm and flexible.
  3. Hold the frame in the desired shape until it cools down and hardens.
  4. If needed, reinforce the repaired area with epoxy resin for added strength.

Fixing Metal Frames


Soldering is a common method for repairing metal frames. It requires a soldering iron and solder wire. Follow these steps:

  1. Clean the broken area and remove any dirt or residue.
  2. Heat the soldering iron and apply flux to the broken ends.
  3. Touch the soldering iron to the flux, allowing it to melt.
  4. Apply the solder wire to the melted flux, creating a bond between the broken pieces.
  5. Hold the pieces together until the solder cools and solidifies.


For more severe breaks in metal frames, welding may be necessary. Welding should be performed by a professional who has experience with eyewear repairs. Consult a local eyewear repair specialist or optician for assistance.

Repairing Hinges

Hinges are a common point of failure in glasses frames. If a hinge breaks or becomes loose, follow these steps to repair it:

  1. Remove the hinge screw using a small screwdriver.
  2. Clean the area around the hinge thoroughly.
  3. Apply a small amount of epoxy resin to the hinge area.
  4. Reinsert the hinge screw and tighten it securely.
  5. Allow the epoxy to cure fully before opening and closing the hinge.

Replacing Temples or Arms

If a temple or arm is severely damaged or beyond repair, it may need to be replaced. Contact the manufacturer or visit an eyewear retailer to inquire about replacement parts. Some retailers offer temple replacement services or can recommend a professional repair technician.

Fixing Nose Pads

Nose pads can become loose or break over time. To fix or replace them, follow these steps:

  1. Remove the old nose pad using a small screwdriver or pliers.
  2. Clean the area where the nose pad was attached.
  3. Attach a new nose pad using the appropriate screws or adhesive.
  4. Ensure the nose pad is secure and comfortable on your nose.

Preventive Measures

To avoid future damage to your glasses frames, consider the following preventive measures:

  1. Handle your glasses with care, especially when taking them on and off.
  2. Store your glasses in a protective case when not in use.
  3. Avoid placing your glasses face down on hard surfaces.
  4. Regularly check and tighten screws to prevent loosening.


Repairing broken glasses frames can be a cost-effective and practical solution. By following the appropriate methods and using the right tools, you can extend the life of your eyewear. Remember to assess the damage, choose the correct repair method, and take preventive measures to minimize future breakages.


  1. Can I repair my glasses frames at home?
  2. What should I do if my glasses frame is severely damaged?
  3. Is it possible to solder plastic frames?
  4. How much does it cost to repair glasses frames?
  5. Can I use regular glue instead of superglue or epoxy resin?